View CLS15-22C-L213B-TR8-15_9078328.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

1 copyright ? 2012, everlight all rights reserved. re lease date : 6.4.2013. issue no: dls-0000056 rev. 1 www.everlight.com rgb color light sensor surface - mount cls15-22c/l213r/tr8 cls15-22c/l213g/tr8 cls15-22c/l213b/tr8 features ? surface-mount plastic package ? high sensitivity for red, green, and blue light sou rce cls15-22c/l213 r /tr8 ( p= 620nm, red) cls15-22c/l213 g /tr8 ( p= 550nm, green) cls15-22c/l213 b /tr8 ( p= 470nm, blue) ? good stable analog output with temperature shift ? size: 3.2mm (l)*2.7mm (w)*1.1mm (h) ? operating temperature performance, -40 o c to 85 o c ? active area: 1.8 mm 2 ? rohs compliant and pb free package description cls15-22c/l213/tr8 series color sensor device is on e channel si photodiode sensitivity to red, green a nd blue region spectrum in miniature smd package. everlight color sensor series product is the good effective and low cost solution to white color balance, color detection an d color management applications. applications ? color adjustment for led back light system ? color adjustment for led projector ? color detection ? white balance adjustment ? consumer and mobile appliances
datasheet ambient light sensor surface ? mount cls15-22c/l213r/tr8 cls15-22c/l213g/tr8 cls15-22c/l213b/tr8 2 copyright ? 2012, everlight all rights reserved. re lease date : 6.4.2013. issue no: dls-0000056 rev. 1 www.everlight.com package dimensions unit : mm tolerances : 0.1mm anode cathode
datasheet ambient light sensor surface ? mount cls15-22c/l213r/tr8 cls15-22c/l213g/tr8 cls15-22c/l213b/tr8 3 copyright ? 2012, everlight all rights reserved. re lease date : 6.4.2013. issue no: dls-0000056 rev. 1 www.everlight.com absolute maximum ratings parameter symbol condition rating units reverse breakdown voltage v br i r = 100 a 35 v forward voltage v f i f = 10ma 0.5~1.3 v operating temperature t opr -- -40 ~ +85 c storage temperature t stg -- -40 ~ +85 c soldering temperature [note] t sol -- 260 c note: soldering time Q 5 seconds electrical and optical characteristics (t a =25 ) red color sensor : cls15-22c/l213r/tr8 parameter symbol condition m in. t yp. m ax. unit peak sensitivity wavelength p -- -- 620 -- nm short-circuit current i sc e v =100lux v r =0v [note] -- 0.086 -- a light current i l1 e v =100lux v r =5v [note] -- 0.091 -- a i l2 e v =1000lux v r =5v [note] -- 0.83 -- a reverse dark current i d e v =0 v r = 10 v -- 2 10 na total capacitance ct ee=0mw /cm2 f=1mhz vr=5v -- 12 -- pf note: white fluorescent light (color temperature = 6500k) is used as light source.
datasheet ambient light sensor surface ? mount cls15-22c/l213r/tr8 cls15-22c/l213g/tr8 cls15-22c/l213b/tr8 4 copyright ? 2012, everlight all rights reserved. re lease date : 6.4.2013. issue no: dls-0000056 rev. 1 www.everlight.com green color sensor: cls15 - 22c/l213g/tr8 parameter symbol condition min. typ. max. unit peak sensitivity wavelength p -- -- 550 -- nm short-circuit current i sc ev=100lux v r =0v [note] -- 0.075 -- a light current i l1 ev=100lux v r =5v [note] -- 0.082 -- a i l2 ev=1000lux v r =5v [note] -- 0.72 -- a reverse dark current i d ev=0 lux v r = 10 v -- 2 10 na total capacitance ct ee=0mw /cm2 f=1mhz vr=5v -- 12 -- pf note: white fluorescent light (color temperature = 6500k) is used as light source. blue color sensor: cls15-22c/l213b/tr8 parameter symbol condition m in. t yp. m ax. unit peak sensitivity wavelength p -- -- 470 -- nm short-circuit current i sc ev=100lux v r =0v [note] -- 0.042 -- a light current i l1 ev=100lux v r =5v [note] -- 0.046 -- a i l2 ev=1000lux v r =5v [note] -- 0.39 -- a reverse dark current i d e v =0 lux v r = 10 v -- 2 10 na total capacitance ct ee=0mw /cm2 f=1mhz vr=5v --- 12 --- pf note: white fluorescent light (color temperature = 6500k) is used as light source.
datasheet ambient light sensor surface ? mount cls15-22c/l213r/tr8 cls15-22c/l213g/tr8 cls15-22c/l213b/tr8 5 copyright ? 2012, everlight all rights reserved. re lease date : 6.4.2013. issue no: dls-0000056 rev. 1 www.everlight.com 1 10 100 1000 10000 1e -4 1e -3 0.01 0.1 1 10 v r =5v ; ta=25 o c c ls 15-22c /l213r c ls 15-22c /l213g c ls 15-22c /l213b ouput current (ma) illum inance (lux) 1 2 3 4 5 6 7 0.00 0.05 0.10 0.15 0.20 white fluorescent light ev = 100lux average light current (ua) voltage (v) c ls 15-22c /l213r /tr 8 c ls 15-22c /l213g/t r 8 c ls 15-22c /l213b/tr 8 -60 -40 -20 0 20 40 60 80 100 0.01 0.1 1 10 100 1000 vr = 10 v ev = 0 lux cls15-22c/l123b/t r8 cls15-22c/l123g/t r8 cls15-22c/l123r/t r8 average dark current (na) temperature ( ) -60 -40 -20 0 20 40 60 80 100 0.01 0.1 1 10 ev = 100lux average light current (ua) temperature ( ) cls 15-22c/l213r/tr8 cls 15-22c/l213g/tr8 cls 15-22c/l213b/tr8 typical electro-optical characteristics curves fig.1 dark current vs. temperature fig.2 light cu rrent vs. illuminance (typ.) (typ.) fig.3 light current vs. voltage fig.4 light curre nt vs. temperature (typ.) (typ.) fig.5 spectral response (blue region) fig.6 spectral response (green region) (typ.) (typ.)
datasheet ambient light sensor surface ? mount cls15-22c/l213r/tr8 cls15-22c/l213g/tr8 cls15-22c/l213b/tr8 6 copyright ? 2012, everlight all rights reserved. re lease date : 6.4.2013. issue no: dls-0000056 rev. 1 www.everlight.com fig.7 spectral response (red region) (typ.)
datasheet ambient light sensor surface ? mount cls15-22c/l213r/tr8 cls15-22c/l213g/tr8 cls15-22c/l213b/tr8 7 copyright ? 2012, everlight all rights reserved. re lease date : 6.4.2013. issue no: dls-0000056 rev. 1 www.everlight.com recommended method of storage reflow terms: jedec level 4 specification dry box storage is recommended as soon as the alumi num bag has been opened prevent moisture absorption. the following conditions shoul d be observed, if dry boxes are not available: storage temperature 10 to 30 storage humidity Q 60%rh max after more than 72 hours under these conditions moi sture content will be too high for reflow soldering. in case of moisture absorption, t he devices will recover to former condition by dryi ng under the following condition: 192 hours at 40 +5 /-0 and 5%rh (dry air / nitrogen), or 96 hours at 60 +5 and < 5%rh for all device containers, or 24 hours at 125 +5 not suitable for reel or tubes esd precaution: proper storage and handing procedures should be fol lowed to prevent esd damage to the devices especially when they are removed from t he anti-static bag. electro-static sensitive device s warning labels are on the packing. recommended solder profile notice: (1) reflow soldering should not be done more than t wo times. (2) when soldering, do not put stress on the device s during heating. (3) after soldering, do not warp the circuit board.
datasheet ambient light sensor surface ? mount cls15-22c/l213r/tr8 cls15-22c/l213g/tr8 cls15-22c/l213b/tr8 8 copyright ? 2012, everlight all rights reserved. re lease date : 6.4.2013. issue no: dls-0000056 rev. 1 www.everlight.com soldering iron each terminal is to go to the tip of soldering iron temperature less than 350 for 3 seconds within once in less than the soldering iron capacity 25w. leave two seconds and more intervals, and do soldering of each termin al. be careful because the damage of the product is often started at the time of the hand solder. repairing repair should not be done after the device have bee n soldered. when repairing is unavoidable, a double -head soldering iron should be used (as below figure). it should be confirmed beforehand whether the charact eristics of the device will or will not be damaged by repairing.
datasheet ambient light sensor surface ? mount cls15-22c/l213r/tr8 cls15-22c/l213g/tr8 cls15-22c/l213b/tr8 9 copyright ? 2012, everlight all rights reserved. re lease date : 6.4.2013. issue no: dls-0000056 rev. 1 www.everlight.com packing quantity specification 3000 pcs/ 1 reel label format cpn: customer?s production number p/n : production number qty: packing quantity cat: ranks hue: peak wavelength ref: reference lot no: lot number made in taiwan: production place
datasheet ambient light sensor surface ? mount cls15-22c/l213r/tr8 cls15-22c/l213g/tr8 cls15-22c/l213b/tr8 10 copyright ? 2012, everlight all rights reserved. re lease date : 6.4.2013. issue no: dls-0000056 rev. 1 www.everlight.com reel dimensions tape dimensions unit: mm tolerance: 0.1mm unit: mm tolerance: 0.1mm
datasheet ambient light sensor surface ? mount cls15-22c/l213r/tr8 cls15-22c/l213g/tr8 cls15-22c/l213b/tr8 11 copyright ? 2012, everlight all rights reserved. re lease date : 6.4.2013. issue no: dls-0000056 rev. 1 www.everlight.com moisture resistant packaging aluminum moistue-proof bag label desiccant label note: 1. above specification may be changed without notic e. everlight will reserve authority on material cha nge for above specification. 2. when using this product, please observe the abso lute maximum ratings and the instructions for using outlined in these specification sheets. everlight assumes no re sponsibility for any damage resulting from use of t he product which does not comply with the absolute max imum ratings and the instructions included in these specification sheets. 3. these specification sheets include materials pro tected under copyright of everlight corporation. pl ease don?t reproduce or cause anyone to reproduce them without everlight?s consent.

▲Up To Search▲

Price & Availability of CLS15-22C-L213B-TR8-15

	To Download CLS15-22C-L213B-TR8-15 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .